Maɓalli na yau da kullun da mai sarrafa zafi
Gabatarwar samfur
Mai kula da na'ura guda ɗaya TNK-M(TH) baki
Babban aikin
Sarrafa magudanar ruwa gabaɗaya, lokacin da zafi ya yi yawa ko kuma za a sami ƙwanƙwasa, fara kaya kuma daidaita zafi zuwa ƙimar da aka saita.
Halayen fasaha
Ikon farawa na huda: 88% RH±5% RH (a 20℃) Gudun amsawa: ƙimar al'ada≤5S Load iko: manual/atomatik sarrafawa Fitarwa: ninka ƙarfin lantarki mai aiki, ƙimar ƙarfin ƙarfin ƙarfin AC220V/5A girma: 48× 48×78mm ku³.
Hanyar shigarwa
(1) Nau'in tushe: Gyara 8-core relay base on 35mm dogo ko kai tsaye a kan farantin hawa ta cikin ramukan dunƙule masu hawa.
(2) Abun ciki: A 45+0.5×45+0.5mm² an yi rami a kan sashin shigarwa, kuma ana gyara na'urar a kan panel ta hanyar shigarwa.
Dual condensation mai kula TN2K-M (TH) baki
Babban aikin
Kula da ƙazanta ta hanyoyi biyu, lokacin da zafi ya yi yawa ko kuma za a sami ƙwanƙwasa, fara kaya kuma daidaita zafi zuwa ƙimar da aka saita.Yana iya sarrafa wurare daban-daban guda biyu a lokaci guda ko sarrafa yanayi ɗaya don cimma inshora biyu.
Thalaye na fasaha
Ikon ruwa: 88% RH±5% RH (a 20℃)
Gudun amsawa: ƙimar al'ada≤5S
Ikon kaya: juyawa ta hannu/ta atomatik
Fitarwa: ninka ƙarfin ƙarfin aiki, ƙimar ƙarfin juriya AC220V/3A×2
Shafin: 48×48×78mm ku³
Hanyar shigarwa
(1) Nau'in tushe: Gyara 8-core relay base on 35mm dogo ko kai tsaye a kan farantin hawa ta cikin ramukan dunƙule masu hawa.
(2) Abun ciki: A 45+0.5×45+0.5mm² an yi rami a kan sashin shigarwa, kuma ana gyara na'urar a kan panel ta hanyar shigarwa.
Mai sarrafa zafin jiki TWK-M(TH) baki
Babban aikin
Ikon zafin jiki na hanya ɗaya, daidaita zafin jiki zuwa ƙimar aiki da aka saita.An raba shi zuwa nau'in dumama da nau'in sanyaya.
Halayen fasaha
Yanayin sarrafa zafin jiki: Dangane da buƙatun mai amfani, saita kafin barin masana'anta (-10 ~ 110℃) Ciwon ciki:±5℃
Ikon kaya: juyawa ta hannu/ta atomatik
Fitarwa: ninka ƙarfin ƙarfin aiki, ƙimar ƙarfin juriya AC220V/3A
Shafin: 48×48×78mm ku³
Hanyar shigarwa
(1) Nau'in tushe: Gyara 8-core relay base on 35mm dogo ko kai tsaye a kan farantin hawa ta cikin ramukan dunƙule masu hawa.
(2) Abun ciki: A 45+0.5×45+0.5mm² an yi rami a kan sashin shigarwa, kuma ana gyara na'urar a kan panel ta hanyar shigarwa.
Mai kula da yanayin zafi TWNK-M (TH) baki
Babban aikin
Naúrar sarrafa magudanar ruwa guda ɗaya da naúrar sarrafa zafin jiki ɗaya.Yana iya sarrafa zafin jiki da zafi na yanayi a cikin ainihin lokacin, fara lodi ta atomatik, tabbatar da cewa ma'aunin zafin jiki ya dace da ma'aunin aiki, da kuma hana ƙura.An raba shi zuwa nau'in dumama da nau'in sanyaya.
Halayen fasaha
Ikon ruwa: 88% RH±5% RH (a 20℃)
Gudun amsawa: ƙimar al'ada≤5S
Kewayon sarrafa zafin jiki: An saita ƙimar sarrafawa kuma an saita kafin barin masana'anta bisa ga buƙatun mai amfani.
(-30-70°C) Ciwon ciki: 4 ~ 6℃
Ikon Load: Ma'ana/Cikin Sauyi ta atomatik
Fitarwa: Wutar lantarki mai aiki sau biyu, ƙimar ƙarfin juriya AC220V/3Ax:
Shafin: 48×48×78mm ku³
Ihanyar kafawa
(1) Nau'in tushe: Gyara 8-core relay base on 35mm dogo ko kai tsaye a kan farantin hawa ta cikin ramukan dunƙule masu hawa.
(2) Abun ciki: A 45+0.5×45+0.5mm² an yi rami a kan sashin shigarwa, kuma ana gyara na'urar a kan panel ta hanyar shigarwa.
Mai sarrafa dumama da humidification ta atomatik CHTK-KS-3
Aiki
Za a iya haɗa nau'i biyu na na'urori masu auna firikwensin da masu dumama a waje, kuma ana iya gano yanayin zafi da zafi na yanayin da aka auna a wurare da yawa a lokaci guda.Matsakaicin zafin jiki ƙayyadadden yankin zafin jiki bisa ga buƙatun mai amfani.Lokacin da yawan zafin jiki na ma'aunin da aka auna shi ne ƙasa da saita ƙananan iyaka, mai sarrafawa yana motsa mai mai ƙira don aiki.A wannan lokacin, yanayin da aka auna yana fara zafi.Lokacin da aka auna zafin yanayi ya kai saiti Lokacin da aka kai iyakar babba, dakatar da dumama.Sarrafa yanayin zafi na dangi shine lokacin da firikwensin zafi ya gano cewa akwai yanayin daɗaɗɗa a cikin mahallin da aka auna, mai sarrafawa yana motsa injin don yin aiki don lalata yanayin haɓaka.
Akwai aikin ƙararrawar cire haɗin hita a ciki, yankin zafin jiki shine 5 ~ 15°C (mai amfani kuma yana iya bayyana shi), kuma kula da zafi yana da zaɓuɓɓuka biyu na 88% RH da 75% RH.Ana iya sarrafa fitarwar da hannu, ta yadda zai iya cire danshi cikin sassauƙa, sarrafa zafin jiki, gane daidaitawar atomatik, kuma tabbatar da ingantaccen aiki mai aminci na ayyukan atomatik.
Use
Yafi amfani da daban-daban nau'i na canza kabad, kewaye breakers da inji kwalaye, atomatik dumama da dehumidification da atomatik dumama a cikin low zafin jiki yanayi, don hana canza malfunctions lalacewa ta hanyar rufi creepage ko inji gazawar lalacewa ta hanyar low zazzabi yanayi.Hakanan za'a iya amfani dashi a wasu lokuta waɗanda ke buƙatar cire humidification ta atomatik da dumama mai ƙarancin zafi ta atomatik.
Pfasali fasali
Saboda karvawar sabuwar fasahar ji tare da matakin ci gaba na ƙasa da ƙasa, babban aiki da aka shigo da shi, babban madaidaici, juriya mai lalacewa, tsawon rai, babban abin dogaro mai zafi firikwensin da firikwensin zafi, da kewaye wanda ya ƙunshi haɗaɗɗun da'irori da sauran su. madaidaicin kayan lantarki, na iya yin aiki a tsaye da dogaro a wurare daban-daban na yanayi na dogon lokaci.Saboda haka, yana da halaye na musamman high hankali, da sauri amsa, kananan size, tsawon rai, da sauki shigarwa.
Yanayin amfani na yau da kullun
1. Zazzabi: -20~+70℃
2. Danshi: bai wuce 93% RH ba
3. Matsin yanayi: 80 ~ 110Kpa
4. Juriya:≥100MΩ
Babban alamun fasaha
1. Danshi: Yaushe≥88% RH ko 75% RH, gudun ba da sanda yana canzawa daga al'ada a buɗe zuwa rufaffiyar kulawa.±5% RH
2. Zazzabi: Relay yana rufe lokacin≤5℃±2℃, kuma relay yana sake saitawa lokacin≥15℃±2℃
3. Kula da mai zafi: manual / atomatik sauyawa, yawan zafin jiki da aka raba
4. Fitarwa: 1 sau aiki ƙarfin lantarki, rated ikon AC 220V5A
5. Laifi ƙararrawa: kullum bude lamba rufaffiyar fitarwa, iya aiki AC 20V A
6. Wutar lantarki mai aiki: AC220V×(80 ~ 110%), 50Hz
7. Girma: 60×120×135m³
8. Girman rami 55+0.5×115+0.5mm²
Kariya don amfani
1. Lokacin da aka kunna wutar lantarki a karon farko, idan yanayin zafin jiki ya fi girma da ƙimar zafin zafin da ake buƙata, hasken kula da zafin jiki zai fita, wanda shine al'ada ta al'ada.Sanya yanayin zafin da firikwensin ya faɗo ƙasa da ƙimar zafin zafin da ake nufi da sarrafa zafin jiki, kuma hasken ikon sarrafa zafin jiki yana kunne.Idan eh, yana nufin cewa da'irar sarrafa zafin jiki tana aiki akai-akai.
2. Don gwada na'ura mai saka idanu, zaka iya amfani da janareta mai zafi ko numfashi, kusanci firikwensin na'urar na kimanin daƙiƙa 5, hasken da ya dace akan mai saka idanu yana kunne, kuma nauyin ya fara aiki;nisanta daga tururin ruwa, hasken mai nuna alama yana kashe, lodin ya daina aiki, yana nuni da kwarjini Tsarin sa ido yana aiki da kyau.
Tunatarwa ta musamman, kar a nutsar da na'urar firikwensin kai tsaye cikin ruwa ko ɗigo ruwa ko fesa tururi mai zafi a kai!!!In ba haka ba, yana da sauƙi don haifar da ɗan gajeren da'ira na firikwensin raƙuman ruwa, kuma ba za a iya farawa da sarrafa na'urar akai-akai ba.
3. Domin tabbatar da aminci da azanci na sashin kula da na'urar, da fatan za a bincika akai-akai ko na'urar firikwensin ya gurɓata da ƙura, kuma idan haka ne, dole ne a tsaftace shi cikin lokaci.Yanayin tsabtace firikwensin na'ura:
Ba a yarda da abubuwan narkewa ba, kuma ana iya goge su a hankali ƙarƙashin tururin ruwa tare da swab ɗin auduga.
4. Yanayin maballin "88% RH / 75% RH": lokacin da aka tashi sama, ma'aunin kula da na'ura shine 88% RH;lokacin da aka danna shi (hasken mai nuna alama yana kunne), ma'aunin sarrafa na'ura shine 75% RH.
5. Yanayin maɓallin "Auto/Manual":
Lokacin da aka tashi, tsarin yana cikin yanayin aiki ta atomatik;lokacin da aka danna ƙasa (hasken mai nuna alama yana kunne), ana iya tilasta shi ya yi zafi kuma a duba ko injin ɗin yana da al'ada.Idan an katse wutar lantarki, daidaitaccen hasken mai nuna alama zai yi haske da haske, kuma za a rufe lambar fitarwar ƙararrawa.
6. Ma'anar matsayi na gudana, lokacin da condensation I da condensation II ke kunne, yana nufin cewa zafi na yanayi ya yi yawa, kuma an kunna condensation;lokacin da kula da zafin jiki I da zafin jiki na II ke kunne, yana nufin cewa yanayin yanayin ya yi ƙasa sosai, kuma ana kunna zafin jiki.
Idan aka gano na'urar duba yana aiki ba bisa ka'ida ba, duba ko wutar lantarki mai aiki da zafin jiki da sauran yanayin aiki suna cikin kewayon kewayon, da kuma ko haɗin firikwensin ya katse ko kuma ya gajarta.
Abubuwan Aikace-aikace
| sunan samfur | samfurin samfurin | aiki na asali | maganganu | |
| nau'in tsayayye Mai kula da na'ura guda ɗaya | TNK-MD | | Gudanar da raɓa tare da aikin hannu / atomatik | Shigar dogo na jagora |
| TNK-M(TH) | Bude rami shine 45mm * 45mm | |||
| nau'in tsayayye Dual condensation mai kula | Saukewa: TN2K-MD |
| Ikon matsewar hanya biyu tare da aikin hannu / atomatik | Shigar dogo na jagora |
| TN2K-M(TH) | Bude rami shine 45mm * 45mm | |||
| nau'in tsayayye zafin jiki da mai kula da zafi | TWNK-MD |
| Duk yanayin zafi, duk hanyar raɓa, fitarwa sau biyu Tare da aikin hannu Lura: Za a tabbatar da zafin jiki lokacin yin oda Tare da hita ko fan don amfani | Shigar dogo na jagora |
| TWNK-M (TH) | Bude rami shine 45mm * 45mm | |||
| nau'in tsayayye Mai sarrafa zafin jiki guda ɗaya | TWK-MD |
| Yanayin zafin hanya tare da aikin hannu / atomatik Lura: Za a tabbatar da zafin jiki lokacin yin oda Tare da hita ko fan don amfani
| Shigar dogo na jagora |
| TWK-M(TH) | Bude rami shine 45mm * 45mm | |||
| nau'in tsayayye Mai sarrafa zafin jiki biyu | Saukewa: TW2K-MD |
| Hannun zafin jiki guda biyu tare da aikin hannu / atomatik Lura: Za a tabbatar da zafin jiki lokacin yin oda Tare da hita ko fan don amfani | Shigar dogo na jagora |
| TW2K-M(TH) | Bude rami shine 45mm * 45mm | |||
